HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 37
Engeniostoragearray. YouwillbeaskedforthehostnamesorIP
addressesandthepasswordforyourstoragearraycontrollers.
Applytheconfiguration.WhenyouhavecompletedtheStorage
Settingstab,clickApply(atthebottomoftheClusterConfiguration
window)tosavetheconfigurationthatyouhavecreated.
The
configurationistheninstalledontheserverthatyouareusingto
connecttotheManagementConsole.Youwillthenbeaskedwhether
youwanttostarttheclusteronthatserver.IfyouconfiguredWeb
management‐basedfencing,answerNo.Otherwise,answerYes.
GototheCluster‐WideConfig urationtab.
Cluster Wide Configuration Tab
Thistabisusedtoexporttheclusterconfigurationtotheotherservers
thatwillbeinthecluster.ItcanalsobeusedtostartorstopHPClustered
FileSystemonspecificservers.