HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 36
AlloftheavailablepartitionsonthatdiskorLUNthenappearinthe
bottomofthewindow.SelectoneofthesepartitionsandclickAdd.
(Theminimumsizefora membershippartitionis1GB.)Repeatthis
proceduretoselecttwomoremembershippartitions.Werecommend
thatthepartitionsbe
ondifferentdisks.
Whenselectingpartitionsforuseasmembershippartitions,besure
thattheydonotcontainanyneededdata.Whenthemembership
partitionsarecreated,anyexistingdatawillbeerased.
2. Snapshotconfiguration.HPClusteredFileSystemsupportsarray‐
basedsnapshots.Ifyouwanttousethiscapability,
youwillneedto
configurethesnapshotmethod.
NOTE: Array‐basedhardwaresnapshotsaresupportedonEngenio
storagearraysandHewlett‐PackardStorageWorksEnterprise
VirtualArray(EVA)storagearrays.TheappropriateEngenio
orHPsoftwaremustbeinstalledasdescribedunderstep“15.
InstallHardwareSnapshotSoftware(Optional)”onpage22.
Toconfigurethesnapshotmethod,clickAdd,selectthe
appropriate
method,andthensupplyanyrequestedconfigurationinformation.
HP‐EVAstoragearray.Youwillbeaskedforthehostnameand
authenticationinformationforthemanagementappliance.