HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 30
1. RemoteManagementControllerVendor.Selectthevendorforyour
RemoteManagementController.
2. RemoteManagementControllerID.SpecifyhowHPClusteredFile
SystemshouldidentifytheRemoteManagementController
associatedwitheachserver.Useoneofthefollowingmethods.
–EnterthehostnameorIPaddressfortheRemoteManagement
Controllerassociated
withthisserver.Youwillneedtousethis
methodifyourRemoteManagementControllersarefromdifferent
vendors.
–Select“Cluster‐widePattern”andthenspecifythecommon
namingschemethatyouareusingfortheRemoteManagement
Controllers(eitherahostnamesuffixoranIPaddressdelta,as
describedbelow).