HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 29
2. SNMPCommunityString.ThedefaultSNMPcommunity stringfor
HPClusteredFileSystemisprivate.Ifyouwanttouseacustom
communitystring,entertheappropriatevaluehere.TheSNMP
communitystringmustbesettothesamevalueonHPClusteredFile
SystemandontheSANswitches
configuredabove.
Whenyouhavecompletedtheinformation,gotothe
StorageSettingstab.
WebManagement‐BasedFencing
WhenyouselecteitheriSCSIstorageorFibreChannelstoragewithWeb
management‐basedfencing,theSAN&Fencingtabwillrefreshandask
youforconfigurationinformation.Entertheappropriateinformationfor
theRemoteManagementControllerassociatedwiththeserverthatyou
usedtoconnectto
theManagementConsole.
NOTE: Laterinthisprocedurethecompleteclusterconfigurationwillbe
exportedtotheotherserversthatwillbeinthecluster.Duringthe
export,HPClusteredFileSystemwill,wherepossible,usethe
informationthatyouspecifiedontheSAN&Fencingtabto
configureWebmanagement‐basedfencingonthe
otherservers.If
aparticularentryontheSAN&Fencingtabdidnotapplytoall
servers,HPClusteredFileSystemwillaskforthatinformationfor
eachoftheotherservers.
TheRemoteManagementControllertabasksforinformationaboutthe
controllersassociatedwithyourservers.