HP StorageWorks Clustered File System 3.6.1 for Windows installation guide (AP809-96008, October 2009)

Chapter3:InstallHPStorageWorksClusteredFileSystem 28
Selectyourstoragetypeand,forFibreChannel,specifythefencing
methodthatyouwanttouse.
•Fibre‐Channelswitch‐basedfencing,below.
•
Web‐basedfencing
FibreChannelSwitch‐BasedFencing
CompletethefollowingontheSAN&Fencingtab:
1. SANSwitches.SpecifythehostnamesorIPaddressesofthe
FibreChannelswitchesthataredirectlyconnectedtothenodesinthe
cluster.ClickAdd,andthenspecifythehostnameorIPaddressofthe
firstFCswitch.Repeat
thisproceduretospecifytheremainingFC
switches,includingcascadingswitches.IfyouareusinganMPIO
configuration,besuretoconfigurealloftheswitches.