HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

Appendix A: Configure the Cluster from the Command Line 54
mx server start <node>
Start HP Clustered File System on the specified node.
mx config description <description>
The cluster name or description appears on the title bar of the HP
Management Console. The name or description can contain up to 80
characters.
mx config webfencing --ruser <user name> --vendor <vendor> --mixedvendor
yes|no --hostname <name>|--hostsuffix <suffix> |--ipdelta <delta>
[--type reset|shutdown] [--bladeslot <slot>] [--sharedlogin yes|no]
[--rpassword <password>]
Configure web management-based fencing, in which HP Clustered
File System uses remote management hardware on the server to
remove its access to PSFS filesystems. iSCSI storage must use this
fencing method. When configuring web management-based fencing,
you will need to specify how HP Clustered File System should
identify the Remote Management Controller associated with each
server. Use one of these methods:
--hostname <host name>
Specify the hostname for the Remote Management Controller
associated with this server. You will need to use this method if your
Remote Management Controllers are from different vendors.
--hostsuffix <host suffix>
Specify the common suffix to append to each server name to
determine the associated Remote Management Controller name. For
example, if your server names are server1 and server2 and their
Remote Management Controllers are server1-iLO and server2-iLO,
enter -iLO as the suffix.
--ipdelta <ip delta>
Specify the delta to add to each server’s IP address to determine the IP
addresses of the associated Remote Management Controllers. For
example, if your servers are 1.255.200.12 and 1.255.200.15 and their
Remote Management Controllers are 1.255.201.112 and 1.255.201.115,
enter 0.0.1.100 as the delta.