HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

Chapter 4: Other Procedures 44
b. When the Configure Cluster window opens, click Import. On the
Import window, type the IP address or DNS name of the server
from which you want to import the configuration.
5. Add the new server to the cluster. Go to the Cluster Wide
Configuration tab. The Address list shows the servers currently in the
cluster. Click the Add button to add the new server to this list. You
will be asked for the IP address or hostname of the new server. When
the operation is complete, the new server is displayed in the Address
list.
6. Start HP Clustered File System on the new server. Select the new
server from the Address list, and click Start Service to start the HP
Clustered File System service on that server. When HP Clustered File
System is running on the server, click OK to close the Server
Configuration window.
7. Connect to the cluster. Select Start > Programs > HP Clustered File
System > Management Console, and then specify any server in the
cluster on the Connection Parameters window. The new server is now
in the cluster.