HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

Other Procedures

This chapter describes how to perform the following procedures:

• Configure the XIOtech MAGNITUDE Storage Array

• Add a new server to a cluster.

• Move a server from one cluster to another.

• Upgrade the HP Clustered File System license file.

Hewlett-Packard supports Clustered File System with a host of storage

arrays from various vendors; however, XIOtech MAGNITUDE storage

array needs a few variations described below.

Configure the XIOtech MAGNITUDE

Storage Array

Configure the XIOtech MAGNITUDE storage array before you install HP

Clustered File System.

This storage array supports a secure LUN masking capability. There are

two primary modes of operation: No Mapping/Masking and New Server

See Nothing. The configuration you will need to perform depends on

which mode you are using.

“No Mapping/Masking” Mode

All servers that can target the MAGNITUDE device can also see all of the

LUNs on the device. HP Clustered File System can be installed normally