HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

Chapter 3: Setting Up HP StorageWorks Clustered File System 37
Apply the configuration. When you have completed the Storage
Settings tab, click Apply (at the bottom of the Cluster Configuration
window) to save the configuration that you have created.
The configuration is then installed on the server that you are using to
connect to the Management Console. You will then be asked whether
you want to start the cluster on that server. If you configured Web
management-based fencing, answer No. Otherwise, answer Yes.
Go to the Cluster-Wide Configuration tab.
Cluster Wide Configuration Tab
This tab is used to export the cluster configuration to the other servers
that will be in the cluster. It can also be used to start or stop HP Clustered
File System on specific servers.