HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

Chapter 3: Setting Up HP StorageWorks Clustered File System 30
The Remote Management Controller tab asks for information about the
controllers associated with your servers.
1. Remote Management Controller Vendor. Select the vendor for your
Remote Management Controller.
2. Remote Management Controller ID. Specify how HP Clustered File
System should identify the Remote Management Controller
associated with each server. Use one of the following methods.
– Enter the hostname or IP address for the Remote Management
Controller associated with this cluster server. You will need to use
this method if your Remote Management Controllers are from
different vendors.
– Select “Cluster-wide Pattern” and then specify the common
naming scheme that you are using for the Remote Management