HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Setup Guide (403102-005, January 2008)

10
3
Setting Up HP StorageWorks
Clustered File System
This chapter describes how to configure HP StorageWorks Clustered File
System on servers running Microsoft Windows.
Contents of the HP Clustered File System
Distribution
The HP Clustered File System is pre-installed on an HP ProLiant Storage
Server running the Windows Storage Server operating system. The
following files are included in the \Program Files\Hewlett-Packard\HP
Clustered File System folder:
• MxConsole_3.6.0.<xxxx>.msi. The Management Console and mx utility
for use on hosts outside the cluster.
• mxcheck.exe. An HP utility that checks the configuration of the server.
This utility should be run before installing HP Clustered File System.
The mxcheck folder contains tests used by the utility.
• Check
http://www.hp.com/support/manuals > Disk Storage Systems >
Clustered NAS Gateway for the latest versions of the documents.
– HP StorageWorks Clustered File System administration guide
– HP StorageWorks Clustered File System File Serving Option for
Windows administration guide
– HP StorageWorks Clustered File System upgrade guide