HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Installation Guide (418975-003, January 2008)

Chapter 3: Install HP StorageWorks Clustered File System 38
Repeat this procedure to specify the remaining FC switches, including
cascading switches.
2. SNMP Community String. The default SNMP community string for
HP Clustered File System is private. If you want to use a custom
community string, enter the appropriate value here. The SNMP
community string must be set to the same value on HP Clustered File
System and on the SAN switches configured above.
When the SAN & Fencing tab is complete, go to the Storage Settings tab.
Storage Settings Tab
The Storage Settings tab allows you to select membership partitions,
which HP Clustered File System uses to control access to the SAN, and to
create a snapshot configuration for taking hardware snapshots.