HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Installation Guide (418975-003, January 2008)

Chapter 3: Install HP StorageWorks Clustered File System 37
If you have FibreChannel-connected storage and want to configure your
FibreChannel switches into the cluster, go to the Switch Information tab.
(This step is optional; however, if the switches are configured the HP
Management Console can display the switch ports used by the SAN.)
1. SAN Switches. Specify the hostnames or IP addresses of the
FibreChannel switches that are directly connected to the nodes in the
cluster. Click Add, and then specify the hostname or IP address of the
first FC switch.