HP StorageWorks Clustered File System 3.6.0 Windows Storage Server Edition Installation Guide (418975-003, January 2008)

Chapter 3: Install HP StorageWorks Clustered File System 34
1. Remote Management Controller Vendor. Select the vendor for your
Remote Management Controller.
2. Remote Management Controller ID. Specify how HP Clustered File
System should identify the Remote Management Controller
associated with each server. Use one of the following methods.
– Enter the hostname or IP address for the Remote Management
Controller associated with this cluster server. You will need to use
this method if your Remote Management Controllers are from
different vendors.
– Select “Cluster-wide Pattern” and then specify the common
naming scheme that you are using for the Remote Management
Controllers (either a hostname suffix or an IP address delta, as
described below).