HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Setup Guide (February 2006)

Chapter 4: Upgrade HP Clustered File System 44
Change the Fencing Method
If you are upgrading to HP Clustered File System 3.2.1 and also want to
change the fencing method, complete these steps:
1. Use the procedure described earlier to upgrade to the 3.2.1 release.
2. Stop HP Clustered File System on all servers in the cluster.
3. Connect to one server in the cluster via the HP CFS Management
Console. On the Connection Parameters window, enter the IP address
of the server, enter the user and the password, and then click the
Configure button.
4. On the Configure Cluster window, select the Fencing tab, and then
configure the appropriate fencing method. See “Fencing Tab” on page
19 for more information.
5. Click Apply (on the bottom of the Configure Cluster window) to
install the new configuration on the server and answer Yes when you
are asked if you want to start the cluster service.
6. Go to the Cluster Wide Configuration tab and export the new
configuration to the other servers. See “Storage Configuration Tab” on
page 24.
7. Start HP Clustered File System on the remaining servers.