HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Setup Guide (February 2006)

Chapter 3: Setting Up HP StorageWorks Clustered File System 19
2. Secret Network Key. This password is required. It provides additional
security for network communications among the cluster servers. To
set this key, click the Set Secret Network Key button. You can enter
anything you want for this password.
3. Administrator Password. You will need to be an HP Clustered File
System user admin to configure the cluster. By default, the password
for this user is set to hpinvent. If you want to change the password,
click the Change Administrator Password button.
The password can comprise up to 32 characters, with no white space.
The allowable characters are ASCII 33–122.
4. Cluster Administrative Traffic Protocol. Select either multicast or
unicast mode. Multicast mode is recommended; however, if your
network configuration does not allow multicast traffic through the
network, you will need to use unicast mode.