HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Setup Guide (February 2006)

Chapter 3: Setting Up HP StorageWorks Clustered File System 17
• The IP address or hostname of each FibreChannel switch that is
included in the SAN. (This step is required for FibreChannel
switch-based fencing and optional for Web Management-based
fencing via server reset/shutdown.)
• The partitions or LUNs that you want to use for membership
partitions.
Connect to the Management Console
On one server, select Start > Programs > HP Clustered Gateway > HP CFS
Management Console. On the Connection Parameters window that opens
next, enter the IP address of the server, type admin for the user and
hpinvent for the password, and then click Configure.
NOTE: If you click Login, an error message is displayed, and you will be
asked whether you want to set up the cluster. Click Yes to
configure the cluster.
The Configure Cluster window is displayed. Specify information on the
tabs in this order: General Settings, Fencing, Storage Configuration,
Cluster Wide Configuration.
General Settings
This tab asks for general information needed for cluster operations.