HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Setup Guide (February 2006)

Chapter 3: Setting Up HP StorageWorks Clustered File System 6
Setup Procedure
Before starting the installation, be sure to review the configuration and
hardware requirements specified in Chapter 1.
Setup Checklist
The setup procedure consists of the following steps, which are described
in detail following this checklist.
Action Description
Set up iLO. When booting, press F8 to enter the iLO
configuration mode. Set the network
information (IP address) and user/password.

Set up the DNS
hostname.
Each server must be able to resolve its
hostname in DNS.

Configure the
server for WINS
clients.
This step is needed only if the server will be
accessed by WINS clients.

Install a firewall
(optional).
If you install a firewall, ensure that the service
ports required by HP Clustered File System
are open.

Configure the
storage array.
Set up the storage array as described in the
array product documentation.
