HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 6: Configure the SAN 49
sandiskinfo
Disk: \\.\Global\psd2
Uid: 20:00:00:04:cf:13:38:3a::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
The command syntax is as follows:
sandiskinfo [-i|-u|-v] [-al]
The default is -i, which produces the output shown earlier for imported
disks. The -u option produces the same output for unimported disks.
The -a option also lists the partitions on each disk. When combined with
-u, it displays partition information for unimported disks.
sandiskinfo -a
Disk: \\.\Global\psd1 (Membership Disk)
Uid: 20:00:00:04:cf:13:38:18::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
partition 01: size 16M type (PSMP/Active)
partition 02: size 9398M type (PSMP/Inactive)
partition 03: size 16M type (PSMP/Inactive)
partition 04: size 9421M type
partition 05: size 16M type
partition 06: size 9421M type (PSFS Filesystem)
partition 07: size 1028M type
partition 08: size 1028M type (unknown)
Disk: \\.\Global\psd2
Uid: 20:00:00:04:cf:13:38:3a::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
partition 01: size 9M type (PSMP/Active)
partition 02: size 097M type (PSFS Filesystem)
partition 03: size 97M type (PSFS Filesystem)
partition 04: size 9220M type (unknown)
The -l option displays the local device name for each disk, as well as the
default disk information. When combined with -u, it displays local device
names for unimported disks.
sandiskinfo -al
Disk: \\.\Global\psd1 (Membership Disk)
Uid: 20:00:00:04:cf:13:38:18::0 SAN info: fcswitch5:7
Vendor: SEAGATE Capacity: 34733M
Local Device Paths: \\.\Global\PhysicalDrive3
partition 01: size 16M type (PSMP/Active)
partition 02: size 9398M type (PSMP/Inactive)
partition 03: size 16M type (PSMP/Inactive)