HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 6: Configure the SAN 47
To deport a disk from the command line, use the following command:
mx disk deport <uuid> ...
To determine the uuid for the disk, use the mx disk status --imported
command.
You can also use the Disk Info window to deport a disk.
Local Disk Information
The Disk Info window displays disk information from the viewpoint of
the local server. It can be used to match the disk names appearing in the
Microsoft Disk Management utility (the Local Name) with the disk names
that HP Clustered File System uses (the PSD Name). You can also use this
window to import or deport SAN disks.
To see the disk information, select the server on the Servers tab on the HP
CFS Management Console, right-click, and then select View Local Disk
Info.