HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 4: Configure Servers 32
HP Clustered File System License File
To operate properly, HP Clustered File System requires that a license file
be installed on each server in the cluster.
Upgrade the License File
If you receive a new license file from HP, you will need to install it on the
cluster servers. You can either copy the file manually to each server, or
you can install it from the HP CFS Management Console.
Refresh the License File
On each server, HP Clustered File System reads the license file upon
startup and at 15-minute intervals. If you have upgraded the license file
on a server and want HP Clustered File System to read the new license
immediately, use the Refresh/Re-read License feature (select the server on
the Management Console and then select Cluster > Server > Refresh
License).
You can also use the following command:
mx server read_license <server>
Supported HP Clustered File System Features
HP Clustered File System provides device monitors, service monitors,
and notifiers. The license agreement for each server determines which
features are supported on that server. You can use the Display Features
option on the HP CFS Management Console to determine the supported
features for a particular server. Select the server on the Servers window,
right-click, and select View Features.
The Supported Features window lists all of the HP Clustered File System
features. Any features not supported by your license are greyed out.