HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Configure Servers

Before adding a server to a cluster, verify the following:

• The server is connected to the SAN if it will be accessing PSFS

filesystems.

• The server is configured as a fully networked host supporting the

services to be monitored. For example, if you want HP Clustered File

System to provide failover protection for your Web service, the

appropriate Web server software must be installed and configured on

the servers.

•If the hosts file has been modified, it should be consistent with the

DNS.

All servers in the cluster must be on the same subnet.

Add or Modify a Server

To add a new server to a cluster, select Cluster > Server > Add (or click the

Server icon on the toolbar). Then configure the server on the New Server

window.

To modify an existing server, select that server on the Servers window,

right-click, and select Properties. Then make your changes on the Server

Properties window.