HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 17: Other Cluster Maintenance 181
STOP_TIMEOUT. A Stop script was executed but it did not complete
within the specified timeout period.
RECOV_TIMEOUT. A Recovery script was executed but it did not
complete within the specified timeout period.
START_FAILURE. A Start script was executed but it returned a non-zero
exit status.
STOP_FAILURE. A Stop script was executed but returned a non-zero exit
status.
RECOV_FAILURE. A Recovery script was executed but returned a non-
zero exit status.
ILLEGAL TRANSITION. The ClusterPulse process gave instruction to the
monitor_agent process, which is considered to be an illegal state
transition for a monitor. This indicates an internal error and should be
reported to HP Technical Support.
The event is written into the system event log. To view the error, select
the monitor on the Management Console, right-click, and select View
Last Error.
From the command line, use these commands to check the status of
monitors:
mx service status
mx device status
Clear an Error
After you have determined the cause for a script event, be sure to correct
the script on all servers that reported the event. You should then clear the
error. On the Management Console, select the monitor, right-click, and
select Clear Last Error. To clear an error from the command line, use
these commands:
mx service clear <vhost:port> <server> ...
mx device clear <devicename> <server> ...