HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 15: Advanced Topics 155
MX_SERVER=IP address
The primary address of the server that calls the script. The address is
specified in dotted decimal format.
MX_TYPE=(SERVICE|DEVICE)
Whether the script is for a service or device monitor.
MX_VHOST=IP address
The IP address of the virtual host. The address is specified in dotted
decimal format. (Applies only to service monitors.)
MX_PORT=Port or name
The port or name of the service monitor. (Applies only to service
monitors.)
MX_NAME=name
The name of the device monitor. (Applies only to device monitors.)
HP Clustered File System does not set any other variables. If a script
requires a variable such as a pathname, it will need to set it.
Limit the Servers That Can Join a Cluster
The network secret key controls server access to the cluster. When you
create a cluster configuration, you will specify a password that is used as
the network secret key. Servers must have this password to join the
cluster. When you add a new server to the cluster and import the cluster
configuration to it, the network secret key will be included. See the HP
StorageWorks Clustered File System Setup Guide for more information.