HP StorageWorks Clustered File System 3.2.1 Windows Storage Server Edition Administration Guide (February 2006)

Chapter 12: Configure Device Monitors 124
Device Name: Type the name of the device monitor. You can use up to 32
alphanumeric characters.
Application name: Specify the name of the HP Clustered File System
application to be associated with this device monitor. HP Clustered File
System applications are used to group related virtual hosts, service
monitors, and device monitors on the Applications tab. If you leave this
field blank, HP Clustered File System will use the name of the device
monitor as the application name.
Device Type: Select the appropriate device type (
DISK, GATEWAY, or
CUSTOM). See “Overview” on page 119 for a description of these
monitors.
Frequency and Timeout: These fields are set to the default values for the
type of device you have selected. Change them as needed.
Additional parameters: Depending on the type of monitor you are
creating, you will be asked for an additional parameter.
• Monitor partition. For a DISK monitor, specify the partition to be
monitored. The monitor will periodically attempt to read the first
block of this partition. You can specify the partition by a drive letter
such as X: or by a mount point (junction) such as C:\san\vol2.