HP StorageWorks Clustered File System 3.1.1 for Linux Installation Guide (May 2006)

Chapter 4: Install HP Clustered File System 29
When the Fencing tab is complete, go to the Storage Configuration tab.
Storage Configuration
The Storage Configuration tab allows you to identify the FibreChannel
switches included in the cluster, to set the SNMP community string for
Clustered File System, and to select membership partitions, which
Clustered File System uses to control access to the SAN.
1. SAN Switches. If you are using FibreChannel switch-based fencing,
you will need to configure FC switches. If you are using Web
Management-based fencing via server reset/shutdown, this step is
optional; however, if the switches are configured the Clustered File