HP StorageWorks 4400 Scalable NAS File Services wiring diagrams (AN595-96008, October 2009)

ManualsBrandsHP ManualsStorageHP DL380-SL Clustered Gateway

HP StorageWorks

4400 Scalable NAS File

Services wiring diagrams

Third edition: (September 2009)

The information in this document is subject to change without notice.

Printed in the US

www.hp.com

*AN595-96008*

HP technical support

For worldwide technical support information, see the HP support website:

http://www.hp.com/support

Before contacting HP, collect the following information:

• Product model names and numbers

• Technical support registration number (if applicable)

• Product serial numbers

• Error messages

• Operating system type and revision level

• Detailed questions

Additional information

For additional information, see the following HP websites:

• http://www.hp.com

• http://www.hp.com/go/storage

• http://www.hp.com/support/manuals

Page 1

Summary of content (5 pages)

PAGE 1
HP StorageWorks HP technical support 4400 Scalable NAS File Services wiring diagrams For worldwide technical support information, see the HP support website: http://www.hp.
PAGE 2
Back and front view of a 42U base rack Back and front view of a 42U full rack 1. ProCurve 2910al–24G network switch 4. EVA4400 Controller 1. ProCurve 2910al–24G network switch 4. EVA4400 Controller 2. DL360 G6 Server 2 (top) and Server 1 (bottom) 5. M6412 drive enclosure 2. DL360 G6 Server 5 (top) through Server 1 (bottom) 5. M6412 drive enclosures 3. KVM, TFT/Keyboard in front of KVM 6. PDUs 3. KVM, TFT/Keyboard in front of KVM5. 6.
PAGE 3
EVA4400 controller Components This section identifies ports, and so on, of the 4400 Scalable NAS File Services components. DL360 G6 server 1. Fibre port 1 (controller 1) 10. Fibre port 4 (controller 2) 2. Fibre port 2 (controller 1) 11. Fibre port 5 (controller 2) 3. Fibre port 3 (controller 1) 12. Controller 1 4. Fibre port 4 (controller 1) 13. Controller 1 data port 1A 1. Quad Port NIC port 1 7. iLO port 5. Fibre port 5 (controller 1) 14. Controller 1 data port 1B 2.
PAGE 4
KVM wiring Maximum EVA4400 configuration 1. TFT/Keyboard is mounted in front of the KVM switch 5. DL360 G6 Server 3 2. KVM switch 6. DL360 G6 Server 4 3. DL360 G6 Server 1 7. DL360 G6 Server 5 4. DL360 G6 Server 2 System KVM port DL360 G6 Server 5 5 DL360 G6 Server 4 4 DL360 G6 Server 3 3 DL360 G6 Server 2 2 DL360 G6 Server 1 1 Page 4 1. Cable connects controller 1, data port 1B (top left — Cntrl 1, DP1B) to I/O module B, port 2 (bottom right -I/O B, P2). 2.
PAGE 5
Ethernet wiring Fibre Channel wiring NOTE: Servers are numbered 1 through 5 as labeled in the above figure.