HP ProLiant Storage Server User Guide (440584-003, September 2007)

7. Access the HP ProLiant Storage Server using the iLO 2 Remote Console functionality. Log on to
the HP ProLiant Storage Server with the default user name administrator and the password
hpinvent. The HP ProLiant Storage Server Management console starts automatically.
NOTE:
WhentheRemoteConsolefeatureisenabled,youcangetaccesstothestorageserver's
login screen.
The I ntegrated Lights-Out 2 port com es with factory default settings, which the administrator can change.
Administrators may want to add users, change SNMP trap destinations, or change networking settings.
See the HP Integrated Lights-Out 2 User Guide for information about changing these settings. To obtain
this guide, go to h
ttp://www.hp.com/support/manuals, navigate to the servers section, and select
Server management. In the ProLiant E ssentials Software section, select HP Integrated Lights-Out 2 (iLO
2) Standard Firmware.
Configuring the ser ver on the network
Before you begin
When first powering on the storage server you need to have some configuration data readily available
to complete the Rapid Startup Wiz ard. Complete the Server configuration worksheet and use the data
collected to initialize the storage server.
NOTE:
Ensure you are logged into the HP ProLiant Storage Server as a local or domain administrator.
Table 5 Ser
ver configuration worksheet
Configuration Worksheet
Administrative Identity
User name
Change system administrator's user name, which is set by default to
administrator.
User password
Change system administrator's password, which is set by default
to hpinvent.
Alert E-mail Notification
E-mail address aler t sent to
E-mail address for critical, warning, or informational messages
about server status.
E-mail address alert sent from
Must be a valid, well-formed e-mail address that will appear as the
sender of server status e-mail alerts.
SMTP server name or IP
address
Must be a
n e -mail server on your network that supports the Simple
Mail Tra
nsfer Protocol (SMTP).
SNMP Settings (to be completed only if needed)
Contact person
System administrator for the storage server. The contact and location
will be provided to any SNMP management computer that requests
them.
System
location
Any text string, such as a location or phone number. For example,
Floor #3, Financial Services Bldg.
Community name No. 1
The community name is used fo r network authentication when
sending outgoing SNMP messages.
HP ProLiant Storage Server 27