HP ProLiant Storage Server User Guide (440584-003, September 2007)

NOTE:

You can change the administrator name and password when you conﬁgure the server

using the “Rapid Startup Wizard”onpage28.

4. To complete network conﬁguration using the Rapid Startup Wi zard, see

“Conﬁguring the server on the network” on page 27.

IMPORTANT:

If you are using the remote browser method to access the HP Storage Server Management console and

Rapid Startup Wizard, always close the remote session before closing your Internet browser . Closing

the Internet browser does not close the remote session. Failure to close your remote session impacts the

limited number of remote sessions allowed on the storage server at any given time.

Connecting to the storage server permits yo u to access the HP Stora ge Server Management console

(Figure 2). From the console, you can access snap-ins that allow complete server system management.

Figure 2 HP Storage Server Management console

Using the Remote Desktop method

Remote Desktop provides the ability for you to log onto and remotely administer your server, giving you a

method of managing it from any client. Installed for remote administration, Remote Desktop allows only

two concurrent sessions. Leaving a session running takes up one license and can affect other users. If

two sessions are running, additional users will be denied access.

To con

nect the storage server to a network using the Remote Desktop meth od

1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclickOK.

Installing and conﬁguring the server