HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 63
4 - CONFIGURATION-MODE
C
OMMANDS
 “username nopassword” on page 146
 “username password” on page 146
 “username password 0” on page 147
 “username password 7” on page 147
 “wccp enable” on page 147
 “wccp mcast-ttl” on page 148
 “wccp service group” on page 148
 “web auto-logout” on page 150
 “web enable” on page 151
 “web http enable” on page 151
 “web http port” on page 151
 “web httpd listen enable” on page 151
 “web httpd listen interface” on page 152
 “web https enable” on page 152
 “web https port” on page 152
 “web prefs log lines” on page 153
 “web proxy host” on page 153
 “web session renewal” on page 153
 “web session timeout” on page 154
 “write memory” on page 154
 “write terminal” on page 154
aaa authentication login default
Description Configures Remote Authentication Dial-In User Service (RADIUS) or Terminal
Access Controller Access Control System (TACACS+) login settings. The order in
which the methods are specified is the order in which the authentication is attempted.
The no aaa command option clears all authentication states and returns user
authentication to the local username database.
Syntax aaa authentication login default <method>
Parameters
Example
minna (config) # aaa authentication login default radius tacacs+
minna (config) #
<method> Specifies the authentication method: radius, tacacs+, or local. Use a space
separated list.