HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

142 4 - CONFIGURATION-MODE COMMANDS
Parameters
Example
minna (config) # stats bypass clear
minna (config) #
stats settings bandwidth
Description Configure sampled statistics.The no command option disables bandwidth statistics.
Syntax stats settings bandwidth <port> desc <description>
Parameters
Example
minna (config) # stats settings bandwidth 2727
minna (config) #
tacacs-server host
Description Adds a TACACS+ server to the set of servers used for authentication. Some of the
parameters given can override the configured global defaults for all TACACS+
servers. The no command option disables TACACS+ support. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Deployment Guide.
Syntax tacacs-server host {hostname <ip-address> | auth-port <port-number> | timeout
<seconds> | retransmit <retries> | key <string>}
type Specifies the type of statistic: admission_conn, admission_mem,
bypass, cpu_util, duplex_aux, duplex_lan, duplex_pri, duplex_
wan, halt_error, memory, mismatch_peer, paging, raid_error,
raid_warning, rbt, rbt_kernel, service_error, store-corruption,
sw-version.
clear Clears all statistics for type.
interval <seconds> Specifies the sampling interval for this set of samples.
<port> Specifies the port number.
desc
<description>
Specifies a description of the port.