HP StorageWorks Enterprise File Services WAN Accelerator 2.1 Command Line Interface Reference Guide (November 2005)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 107
4 - CONFIGURATION-MODE
C
OMMANDS
Parameters
Example
minna (config) # logging trap notice
minna (config) #
ntpdate
Description Conducts a single-time synchronization with a specified NTP server.
Syntax ntpdate <addr>
Parameters
Example
minna (config) # ntpdate 10.10.10.1
minna (config) #
ntp disable
Description Disables NTP support. The no command option enables NTP support.
Syntax ntp disable
Parameters None
Example
minna (config) # ntp disable
minna (config) #
ntp enable
Description Enables NTP support. The no command option disables NTP support.
Syntax ntp enable
Parameters None
<loglevel> Specifies the logging severity level. The following levels are supported:
• emerg. Emergency, the system is unusable.
• alert. Action must be taken immediately.
• crit. Critical conditions.
• err. Error conditions.
• warning. Warning conditions.
• notice. Normal but significant condition.
• info. Informational messages.
• debug. Debug-level messages.
<addr> Specifies the NTP server to synchronize with.