HP Rack Rail Kit Installation Instructions (464164-001, February 2008)

Figure 2 Insert the 1U server into the rack
Figure 3 Insert the 2U server into the rack
Figure 4 CTO bracket location
4. Secure the server to the rack rails using thumbscrews on the server
front bezel (step 4 in Figures 5, 6).
Figure 5 Secure the 1U server to the rack
Figure 6 Secure the 2U server to the rack
5. Using the holes provided in the rear rack rails, install tie wraps and
route external cable as required (Figure 7).
Figure 7 Cable management with tie wraps
6. Connect all power cords.
Page 3