Server Management Ver. 2.01 User Manual

Configuration
4-6
need to set the mail recipients’ address, sender’s address, the mail subject and content.
Send SNMP Trap
Notify the events through SNMP trap.
4.3.2 Configuring IPMI LAN Parameters
In the IPMI Configuration page, you need to configure the IPMI LAN parameters, especially the BMC
IP address, so that the BMC LAN interface can work normally and the IPMI sub-system information of
the local host can be acquired remotely by the management console.
 LAN Parameter
LAN Channel List
Select one channel from the drop-down list box.
Read Only Community String
Specify the read only community string of SNMP. Length < = 18 chars. If you do not set this field
manually, the default content will be the value read from BMC.
IP Address
Specify the IP address of the NIC connected to the BMC. Obey the IP address criterion.(Necessary
field)
Subnet Mask
Specify the subnet mask of the NIC connected to the BMC. Obey the subnet mask criterion.
Physical Address
Physical address of the NIC connected to the BMC.
Default Gateway IP Address
Specify the default gateway address. Obey the IP address criterion.
Default Gateway Physical Address
Specify the default physical address of the gateway. Obey the physical address criterion.
When you click on the Detect Gateway button, the program will detect the Default Gateway IP
Address and Default Gateway Physical Address, and fill them in the text boxes automatically.
Backup Gateway IP Address
Specify the backup gateway address. Obey the IP address criterion.
Backup Gateway Physical Address
Specify the physical address of the backup gateway. Obey the physical address criterion.
Note: Physical address is equal to MAC Address.