HP ProLiant DL100 G2 Data Protection Storage Server installation guide (June 2006)

4 Configuring t he server on th e
network
Before you begin
When first powering on the storage server you need to have some
configuration data readily available to complete the Rapid Startup Wizard.
Complete the Server configuration worksheet and use the data collected to
initialize the storage server.
Tab le 4 Server configuration worksheet
Configuration Worksheet
Administrative Id entity
User name
Change system administrator’s user
name, which is set by default to
administrator.
User
password
Change system administrator’s
password, which is set by default to
hpinvent.
Aler t E-mail Notification
E-mail
address alert
sent to
E-mail address for critical, warning, or
informational messages about server
status.
E-mail
address alert
sent from
Must be a valid, well-formed e-mail
address that will appear as the sender
of server status e-mail alerts.
SMTP server
name or IP
address
Must be an e-mail server on your
network that supports the Simple Mail
Transfer Protocol (SMTP).
SNMP Settings (to be completed only if needed)
HP ProLiant DL100 G2 Data Protection Storage Server 31