HP ProLiant DL100 G2 Data Protection Storage Server installation guide (June 2006)

1. On the PC client, select Start > Run.AtOpen,typemstsc,thenclick
OK.
2. Enter the serial number of the storage server followed by a hyphen (-) in
the Computer box and click Conn ect. For example, D4059ABC3433-
NOTE:
If you are able to determine the IP address from your
DHCP server, you can substitute the IP address for the
serial number and hyphen (-). For example: 192.100.0.1
3. Log in to the HP ProLiant Data Protection Storage Server with the
default user name administrator and the password hpinvent.TheHP
ProLiant Data Protection Storage Server Management Console and the
Rapid Startup Wizard start automatically.
NOTE:
You can change the administrator name and password
when you configure the server using the Rap id Startup
Wiz ard. See Rapid Startup Wizard on page 34.
4. To complete network configuration using the Rapid Startup Wizard,
see Configuring the server on the network on page 31.
HP ProLiant DL100 G2 Data Protection Storage Server 29