HP ProLiant DL100 G2 Data Protection Storage Server installation guide (June 2006)

3AccessingtheHPData
Protection Storage Server
Management console
Before accessing the HP Data Protection Storage Server Management
console, verify that all cables and cords are connected to the D ata
Protection Storage Server. See the HP ProLiant 1U Rail installation
instructions for additional installation guidance.
To access the HP Data Protection Storage Server Management console,
you can use these access methods:
Direct Attach To connect directly to the storage server
without using the network.
Remote Browser To establish a browser-based connection
to the HP P roLiant Data Protection
Storage Server Management console
from a remote client running Internet
Explorer 5.5 (or later).
Remote Desktop To establish a connection from a remote
client without using a browser . This
method requires the client to h ave
Windows Remote Desktop capability.
F or more information, see Planning for installation on page 13.
IMPORTANT:
An IP address can be substituted for a storage server’s seri al number
when using either Remote Browser or Remote Desktop methods to access
the HP Data Protection Storage Server Management console.
Using the Direct Attach method
You can access the HP Data Protection Storage Server Management
console using a monitor, mouse, and keyboard directly attached to the
storage server.
To connect the storage server to a network using the Direct Attach method
HP ProLiant DL100 G2 Data Protection Storage Server 25