HP ProLiant DL100 G2 Data Protection Storage Server installation guide (June 2006)

10700
8 9
531 42 6 7
10
Figure 4 Back panel
1
Dual USB ports
6
Full height, full length PCI-X sl ot
2
PS/2 mouse port
7
AC power connector
3
NIC connectors
(RJ45)(1–2)
8
PS/2 keyboard port
4
UID LED
9
Serial port
5
Low profile, half length
PCI-X slot
10
D-sub VGA port
Locating and writing down the serial number
Before completing the installation portion of this guide, locate and write
down the storage server’s serial number, which m ay be needed to access
the H P Da ta Protection Storage Server Management console later on
during the set up process.
The HP ProLiant Storage Server’s serial number is located in three places:
• Top of the storage server
• Back of the storage server
• Inside the storage server shipping box
Completing rail kit installation
Install the server into the rack by following the rail installation instructions
for your server model. These installation instructions are provided in printed
form with your server, on the HP ProLiant Data Protection Storage Server
Documentation CD, or at h
ttp://www.hp.com/suppor t/manuals.
For all models of the HP ProLiant DL100 G2 D ata Protection Storage
Server, see HP ProLiant 1U Rail installation instructions.
20
Installing the server