HP ProLiant DL100 G2 Data Protection Storage Server installation guide (June 2006)

Tab le 3 Insta llatio n and confi guration checklis t
Steps
Reference
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
See Checking kit
contents on page 1 8.
2. Complete rail installation
instructions, if applicable.
See the HP ProLiant rail
installation instructions.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the server.
See Cabling the
server on page 21,
Powering on the server,
and Direct Attach method.
4. Access the HP Data
Protection Storage Server
Management console.
• Direct Attach method
• Remote Browse method
• Remote Desktop method
See Accessing
the HP Storage
Server Management
console on page 25.
5. Complete the storage server
configuration worksheet.
See Server configuration
worksheet on page 31.
6. Run Rapid Startup Wizard. See Rapid Startup
Wizard on page 34.
7. Complete system
configuration.
See Completing system
configuration on page 39.
8. Configure storage server
for Web access, if necessary.
See Configuring storage
server for Web access
(
optional) on page 41.
16 Setup overview