Installation Guide, Second Edition - HP Carrier Grade Blade Server bh3710

3
Index
Numerics
18GB Fiber Channel Disk
, 2-2
256 MB DIMM, 2-2
A
Access the MP Console
, 5-10
Acoustics, 7-1
Altitude, 7-1
Audience Assumptions, 1-1
B
Blade Server Chassis
, 2-2
Blade Server Cooling System, 3-6
Blade Server Power-Down, 4-2
Boot Console Handler Boot Procedures, 5-11
Boot Procedures, 5-11
bp2200 Blade (2 slot), 2-2
bp2200 Server Blade, 5-7
bp2200 Server Blade LED Definitions, 5-8
C
Chassis and Management Blade Power-Up
, 4-1
Chassis Power-Down, 4-2
Compact PCI, 1-1
Configuration Procedures, 5-6, 5-9
Configuring the MP, 5-9
D
DB9 connector
, 3-3
DC Power Input Module and Cable Connector Pinout
Information
, 3-4
DC Power Supplies, 3-2
DIMM Filler, 2-2
E
Electrostatic Discharge (ESD)
, 2-1
F
F/C Disk Carriers, 5-2
FC and LAN RTM LED Definitions, 5-14
FC and LAN RTM Ports, 5-14
FC disk carrier, 5-17
FC Disk Drive LED Definitions, 5-18
Fibre Channel (FC) and LAN RTM Blade, 2-2
Fibre Channel (FC) Disk Carrier, 5-17
Fibrechannel (FC) and LAN Rear Transition Module
(RTM) Blade, 5-13
G
Grounding
, 3-3
GSP Reset and Transfer of Control (TOC) Buttons,
5-8
H
hp Blade Server Initial Power-up
, 4-1
Humidity, 7-1
I
Installation Guide Contents, 1-1
Install the Slot Blocker, 5-20
Installing and Removing blades, 5-19
Installing and Removing Blades With Locking
Levers
, 5-21
Installing and Removing Carrier Blades, 5-26
Installing the bh3710 Blade Server in a Rack, 2-2
Installing The Carrier Blade, 5-26
L
LAN Cabling Requirements
, 5-5. 5-9
LAN Conectivity Preinstallation Preparation, 5-14
LAN Conectivity to the FC and LAN RTM Ports, 5-14
M
Management Blade
, 5-4
Management Blade Configuration, 5-5, 5-6, 5-10
Management Blade LED Definitions, 5-4
Management Processor Network Parameters
Configuration, 5-10
N
Network Equipment Building Systems (NEBS)
Compliance
, 1-1
P
Power-Down the bp2200 and Management Blades
,
4-2
Pre-Configuration Assumptions, 5-5, 5-9
R
Remote Installation of Operating Systems
, 6-1
Remove the Slot Blocker, 5-20
Removing and Installing Slot Blockers, 5-20
Removing Blades With Locking Levers, 5-23
Removing the Carrier Blade, 5-27
RS232, 3-3
S
Server Blade Power-Up
, 4-1
Server Blades, 5-2
Server Management Blade, 2-2
Site Preparation Guide, 2-1
Site Preperation, 2-1
Specifications for the hp Carrier Grade Server
bh3710
, 7-1
Support Tool Manager, 6-1
T
Temperature
, 7-1
U
Unpacking the Blade Server
, 2-1
W
Weight, 7-1