HP Device Manager 4.6 - WES Imaging Troubleshooting Guide

6. If the NIC drivers installed successfully, the message DrvLoad: Successfully loaded xxxx.inf appears.

7. After you install the NIC drivers successfully, you can verify the network connection with the ipconfig command.

If the network connection is successful, the correct IP information is displayed on the screen. If you do not see the IP

information, wait two minutes or more and then run ipconfig again.

8. After the correct IP information is displayed, you can debug the connection to Shared Folder. For information on the

Shared Folder settings, see Appendix A: Verify the Shared Folder settings by the command line.