HP Device Manager 4.6 - Repository Management

Go to Start > Run and enter the FTP path name. Repeat this process with the Shared Folder path.
Figure 3. Testing access to the FTP
Figure 4. Testing access to the Shared Folder
Use the following steps to test that your access to the repository is with full control. All operations must succeed; otherwise,
you need to fix the mistakes in the repository settings.
1. Create two folders in the HPDM directory.
2. Delete one of them.
3. Access the repository with the Shared Folder.
4. Verify that you can see the folder created in step 1.
5. Create another folder.
6. Delete both folders.
If you use a Shared Folder with domain credentials, make sure that the group policy does not block access from devices not
in the domain, because the devices will be out of domain during the imaging process.
Master Repository configuration
After preparing the file servers, select one to serve as the Master Repository. On the same file server, install the Master
Repository Controller. See the HP Device Manager Administrator Guide for more information on installing the Master
Repository Controller. When the following wizard opens, select the HPDM directory you created as the destination folder.
Figure 5. Selecting the Destination Folder
5