HP Device Manager 4.6 - Imaging Guide

3. The Task Editor will appear. Click OK, and the PXE Deploy task will be sent to the device.
Note
The following settings are preserved on the target device:
—WES 2009 and XPe: Hostname, Network, and Write Filter status
—HP ThinPro 3 and HP ThinPro 4: Hostname and Network
When deploying an image to a shutdown device, the device must support Network boot first so that it can be woken up. This
operation will not preserve any settings on the target device, which is usually used to deploy an image to a crashed device.
You can deploy an image with PXE to a shutdown WES 7 device.
A PXE Deploy task will fail when using a wireless connection.
30