HP Device Manager 4.6 - Imaging Guide

4. Select Cached Imaging. If the thin client uses an advanced network, such as wireless or 802.1x, this option is
necessary.
5. To deploy the image to a device with a different hardware platform than the source device, select Allow Cross-
Platform Imaging. This option takes effect only when deploying an image to a device with a WES operating system.
Note
For example, if you captured a WES image from a t510 and want to deploy it to a t610, you need to select this option.
Otherwise, this Deploy Image task will fail. If you select this option, you need to ensure that the captured image will
work well on the target device.
25