HP Device Manager 4.6 - Imaging Guide

B. Enter values in the Image Name, Description, and Save result as template fields.

C. Click OK, and the _PXE Capture task will be sent to the device.

3. When the task is sent, a PXE Deploy template will be generated in the Task Templates tab using the name you

specified. (The following example uses pxe_demo.) It appears disabled with a status of transferring. If the task fails to

finish, the status will change to failed. If the task finishes successfully, the status will change to be enabled.

Note

A _PXE Capture task cannot be done when a device is shut down or using a wireless connection.