HP Device Manager 4.6 - Configuring DHCP tags

ManualsBrandsHP ManualsSoftwareHP Device Manager

Technical white paper

HP Device Manager 4.6

Configuring DHCP tags

Table of contents

Overview .......................................................................................................................................................................................... 2

Configuring a DHCP server for use with PXE ........................................................................................................................... 2

Configuring a DHCP server with the HPDM Server installed on a different machine ................................................. 2

Configuring a DHCP servier with the HPDM Server installed on the same machine .................................................. 2

Configuring a DHCP server on Linux ..................................................................................................................................... 3

Configuring options 202 and 203 .............................................................................................................................................. 3

For more information ................................................................................................................................................................... 5

Summary of content (5 pages)

PAGE 1
Technical white paper HP Device Manager 4.6 Configuring DHCP tags Table of contents Overview .......................................................................................................................................................................................... 2 Configuring a DHCP server for use with PXE ...........................................................................................................................
PAGE 2
Overview This white paper demonstrates how to configure DHCP tags. Configuring a DHCP server for use with PXE Configuring a DHCP server with the HPDM Server installed on a different machine If problems occur when using PXE, verify that the DHCP server settings do not conflict with PXE. These issues rarely occur. The PXE boot ROM uses the DHCP server to get an IP address, as well as other basic networking information such as a subnet mask or a default gateway.
PAGE 3
A. Type add optiondef 201 STRING 0, and then press Enter. B. Type set optionvalue 201 STRING ‘’ ‘40003’, and then press Enter. Note Replace the items in brackets with the appropriate value. When setting optionvalue 201, the syntax must be written exactly as shown, including the single quotes and single space, otherwise errors will occur. See the following example: ‘192.168.1.1’ ‘40003’ C.
PAGE 4
P1=“value”;P2=“value”;P3=“value”;P4=“value”;P5=“value”;P6=“value”;MG=“value” See the following example: add optiondef 203 CustomName STRING 0 set optionvalue 203 STRING P1=”Asia”;P2=”China”;P3=”Shanghai”;MG=”Company/Department/Group” Note All of the grouping parameters (P1–P6 and MG) are optional, but those specified must be assigned a value.
PAGE 5
For more information To read more about HP Device Manager, go to hp.com/go/hpdm. Sign up for updates hp.com/go/getupdated © Copyright 2014 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of the Microsoft group of companies. Confidential computer software. Valid license from HP required for possession, use or copying. Consistent with FAR 12.211 and 12.