HP Device Manager 4.6 Administrator Guide

Master Repository Controller requirements
Table 2-4 Master Repository Controller requirements
Component Requirements
Operating system Windows Server 2003 R2 with Service Pack 2 (64-bit)
Windows Server 2008 R2 with Service Pack 1 (64-bit)
Windows Server 2012 (64-bit)
Hardware Pentium III or greater
512 MB RAM
2 GB free disk space
NOTE: The above hardware is the minimum required for the Master Repository.
If there will be a large number of imaging or file-copying operations, then HP
recommends using a more powerful system with more free disk space.
Protocol FTP, FTPS, SFTP, or SMB
Recommended third-party FTP servers FileZilla
Microsoft Internet Information Server (IIS) 6.0 or later
freeSSHd
Network requirements
Table 2-5 Network requirements
Component Requirements
Network HPDM supports only IPv4 networks.
HPDM can image devices using either PXE or non-PXE (preferred) methods. If PXE imaging is
desired, make sure that there are no other PXE services running on the network.
If you are using an ISC DHCP server, it must be running at least version 3.0.
Port requirements
If you are using a server behind a firewall, you must add ports 1099 and 40002 to the exception ports
in the firewall settings.
A number of other UDP and TCP ports are required for device/server communication. See
Port
reference on page 85 for a list of standard and custom ports required.
System requirements 11