HP Device Manager 4.6 Administrator Guide

Table B-10 Repository ports (outbound)
Receiver
port
Sender Receiver Protocol Purpose
20 & 21 Master Repository
Controller
FTP server (third-party
software)
TCP These are the default ports for FTP (used
for repositories). Port 20 is for data
transfer and port 21 is for listening to
commands. FTP ports can be configured
via the HPDM Console. If you do not use
the default ports for your FTP server,
please configure the firewall
appropriately.
22 Master Repository
Controller
SFTP server (third-party
software)
TCP This is the default port for SFTP (used for
repositories). SFTP ports can be
configured via the HPDM Console. If you
do not use the default port for your SFTP,
please configure the firewall
appropriately.
137 Master Repository
Controller
NetBIOS Name Service UDP For File and Printer Sharing to allow
NetBIOS Name Resolution.
138 Master Repository
Controller
NetBIOS Datagram
Service
UDP For File and Printer Sharing to allow
NetBIOS Datagram transmission and
reception.
139 Master Repository
Controller
NetBIOS Session
Service
TCP For File and Printer Sharing to allow
NetBIOS Session Service connections.
445 Master Repository
Controller
Microsoft Directory
Services
TCP For File and Printer Sharing to allow
Server Message Block transmission and
reception through Named Pipes.
989 & 990 Master Repository
Controller
FTPS server (third-party
software)
TCP These are the default ports for FTPS
(used for repositories). Port 989 is for
data transfer and port 990 is for listening
to commands. FTPS ports can be
configured via the HPDM Console. If you
do not use the default ports for your
FTPS server, please configure the
firewall appropriately.
92 Appendix B Port reference