HP Device Manager 4.5 - Repository Management

– 139: NetBIOS Session Service
– 445: Microsoft Directory Services
Log level setting of the Master Repository Controller
Modify the configuration file of the Master Repository Controller to get detailed log information for debugging. The file is
located as follows if you use the default path during the installation.
C:\Program Files\Hewlett-Packard\HP Device
Manager\MasterRepositoryController\Controller.conf
Log level options are as follows:
• 0 : Error
• 1 : Warn
• 2 : Infomation
After changing the log level, restart the Master Repository Controller in the Services Control Panel applet for the changes to
take effect.
Connection between the HPDM Server and the Master Repository Controller
• Check that the HPDM Server can connect to the Master Repository Controller.
Use the Connect button in the Master Repository Editor dialog. If the system check fails, the following error dialog
appears. Check that both the IP address for the Master Repository is correct and the 40012 port is allowed through the
firewall, then test again. Only the IP address format is supported.
Figure 7. System Check Failed dialog
• Check that the connection passes the authentication.
SSL authenticates the connection between the HPDM Server and the Master Repository Controller. After the configuration
finishes successfully for the first-time, an authentication certificate and private key are generated between the Server
and the Master Repository Controller.
A. Go to the installation folder of the HPDM Server and find the keystore file hpdmskey.keystore in the folder
InstallerFolder/Server/bin. This file stores the HPDM Server’s private key, the HPDM Server’s
certificate, and the Master Repository’s certificate.
B. Go to the installation folder of the Master Repository Controller and find the following three files:
• Controller.key—Master Repository Controller’s private key
• Controller.crt—Master Repository Controller’s certificate
• Client.crt—HPDM Server’s certificate
The Master Repository Controller refuses any connection requests that do not include the authentication certificate. Also,
the HPDM Server refuses the Master Repository Controller if it does not pass the authentication. If the authentication fails,
the following message appears.
7