HP Device Manager 4.5 - Imaging Guide

5. Select Cached Imaging when deploying an image using the cached mode.

If the thin client uses an

advanced network, such as wireless, 802.1x, etc., this option is necessary.

6. If you want to deploy the image to a device that is a different hardware platform from the source device,

select Allow Cross-Platform Imaging. This option only takes effect when deploying an image to a

device with a WES operating system.

NOTE:

For example, if you captured a WES image from a t510 Thin Client and want to

deploy it to a t610 Thin Client, you need to select this option. Otherwise, this

“Deploy Image” task will fail. If you select this option, you need to ensure the

captured image will work well on the target device.